Invitation | 2027 Rui'an Printing & Packaging Exhibitioninviting you to embark on a new chapter together!
Exhibition at the base · Locking in the source · Direct access to the factory
Rui'an Convention and Exhibition Center
15170300031 | 15381526029
hengzhong282@gmail.com
| Liquid Inlet Mode | Atmospheric pressure or additional applied pressure | 1. Install and use separately as much as possible. |
| Temperature Condition | Depends on diaphragm material | 2. Reduce the usage of pipeline accessories. |
| Maximum Flow Rate | 16 L/min | 3. Keep the original standard inlet and outlet pipe diameters for piping. |
| Air Pressure Range | 1~8 kgf/cm² | 4. When installing rigid pipelines, add a short flexible hose and movable joints. |
| Max Solid Particle Diameter | 1.5mm | 5. Check gaskets for leakage during installation. |
| Noise Level | <50db | 6. Ensure inlet, outlet and air tubes are clean and free of foreign matter before connecting pipelines. |
| Pump Body Material | Aluminum Alloy | 7. Install a filter on the inlet pipe to prevent large solid particles from entering the pump and causing faults. |
| Diaphragm Material | PTFE |